HOW CAN YOU RESET THE LINKSYS AC1200 DUAL-BAND EXTENDER

  1. Home
  2. EXTENDER FIRMWARE UPDATE
  3. HOW CAN YOU RESET THE LINKSYS AC1200 DUAL-BAND EXTENDER

LINKSYS AC1200 DUAL-BAND EXTENDER (RE6500)

LINKSYS AC1200 DUAL-BAND EXTENDER

The Linksys AC1200 Dual-band extender has the speed of the AC1900 on both bands. It also comes with cross-band technology, and you can play online games, streaming music. The extender quickly covers the 10000 sq ft of your home. Here user can get the blanket of the network in every corner of the house. It also works with any router. You can attach the many smart devices because it comes with the 10 x faster Gigabit ports. The user can now use the network on every floor of your home. There is no dead zone in your home. You can get the best security features. Here the user can now set up the router with the Linksys app. The user can also access all devices with the Linksys app.


SETUP OF THE LINKSYS AC1200 DUAL-BAND EXTENDER WITH THE WEB DOMAIN

 

  • The user can unwrap the Linksys AC1200 Dual-band extender.
  • Now the user can check your home network is working accurately.
  • You can now put your extender near the router.
  • Now the user can connect the power adapter with the extender.
  • Here the user can monitor the power light of the extender is working.
  • Now you see that the power light of the extender is not working, then the user can hold the on/off button of the extender.
  • The user can attach the laptop, extender, and modem.
  • You can now open the web browser.
  • Here the user can write www.extender.linksys.com, or the IP address of the router is 192.168.1.1.
  • Now you can enter the username and the password.
  • The user can use the username as the admin and the password as the password.
  • You can now see the setup wizard on the screen.
  • Here you can write the time, place, or the language.
  • Now the user can scan the wifi.
  • It can detect the wifi, but if not, then the user can enter wifi themself.
  • You can now also use the extender and expand the network area in your home/office.

WPS SETUP OF THE LINKSYS AC1200 DUAL-BAND EXTENDER

 

  • The user can open the box of the Linksys AC1200 Dual-Band extender.
  • You can now place the extender in the center of the home.
  • Now the user can check your home network is working.
  • Here the user can now connect the power supply with the extender.
  • You can check the power of the extender is working.
  • In case it is not working, then the user can press the on/off button on the extender.
  • The user can now locate the WPS button on the extender and the router.
  • Here you can press the WPS button first on the extender and then on the router.
  • Now the light starts blinking.
  • It means both devices are attached.
  • You can now use the extender easily. 

LINKSYS APP SETUP OF THE LINKSYS AC1200 DUAL-BAND EXTENDER

 

  • The user can unbox the Linksys AC1200 Dual-Band extender.
  • You can now place the extender with the router.
  • Now the user can check the home network is working.
  • Here the user can attach the power adapter with the extender.
  • The user can now check the power light of the extender is working, if not, then you can press the on/off button of the extender.
  • You can now download the Linksys app from any play store.
  • Now you can type the information about your extender.
  • The user can now scan the QR code of the router.
  • Here you can now wait for a couple of seconds.
  • It can start catching the settings.
  • Now the user can use the extender quickly.

LOG INTO THE LINKSYS AC1200 DUAL-BAND EXTENDER

 

  • You can open the web browser.
  • Here the user can write www.extender.linksys.com, or the IP address is 192.168.1.1.
  • The user can now type the username and the password.
  • Now the user can use the username as the admin and the password as the password.
  • After this, the user can use the settings.

FIRMWARE UPDATE OF THE LINKSYS AC1200 DUAL-BAND EXTENDER

 

  • You can now launch the web browser.
  • Here the user can write www.extender.linksys.com, or the IP address is 192.168.1.1.
  • The user can now type the username as the admin and the password as the password.
  • Now the user can go to the advanced settings.
  • Here the user again taps on the firmware update.
  • You can wait for a few seconds.
  • The user now gets the latest firmware update.

FIRMWARE UPDATE OF THE LINKSYS AC1200 DUAL-BAND EXTENDER WITH THE LINKSYS APP

 

  • You can download the Linksys app from the play store.
  • The user can now enter some information on the extender.
  • Here the user can tap on the firmware update in the settings.
  • You can now wait for a few seconds.
  • Now the user can also get the alert about the latest firmware update.

RESET OF THE LINKSYS AC1200 DUAL-BAND EXTENDER WITH THE WEB DOMAIN

 

  • You can now open the web browser.
  • Here the user can write www.extender.linksys.com or the IP address.
  • After this, the user can type the admin here; the username is the admin, and the password is the password.
  • Now the user can tap on the factory reset in the advance settings.
  • You can now get the extender in the default settings.
  • Here the user can set up the extender again.

HARD RESET OF THE LINKSYS AC1200 DUAL-BAND EXTENDER

 

  • You can locate the reset button on the extender.
  • The user can now press the reset button with the paperclip for a couple of seconds.
  • Here the user can watch the lights start flashing.
  • It can come stable after you release the reset button.
  • Now you get the extender in the default settings.
  • After this, the user can again to the same process for the setup of the extender.

 

Previous Post
WHICH WAY THE USER SETUP THE LINKSYS RE 6500HG EXTENDER
Next Post
HOW CAN YOU DO THE FIRMWARE UPDATE IN THE LINKSYS RE 6250 EXTENDER

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu